P0057 – Meaning, Causes, Symptoms, & Fixes
Code P0057 Definition
H02S Heater Control Circuit Low (Bank 2, Sensor 2)
What Does P0057 Mean?
The HO2S (heated oxygen) sensor calculates the oxygen ratio of the vehicle’s exhaust. This ratio is then communicated to the ECM which controls the emissions of the vehicle. The P0057 code is set when the ECM detects the HO2S sensor is malfunctioning and sending abnormal voltages. In rare cases, the ECM can be defective.
- Check engine light
- Lower fuel economy
- Faulty oxygen sensor (bank 2)
- Malfunctioning ECM sensor heater driver
- Shorted control circuit
- Faulty ECM
Code P0057 Severity – Low
This trouble code will not prevent your vehicle from operating, but may cause it to fail emissions tests. The most common error(s) include: lowered fuel economy, rough engine performance, and HO2S sensor errors. It is recommended to have this code fixed to prevent further damage to the vehicle.
Code P0057 Common Diagnosis Mistakes
Prematurely replacing the HO2S (heated oxygen) sensor without visually inspecting the wiring of the control circuit for disconnection.
- Tools Needed to Diagnose:
Difficulty of Diagnosis and Repair
- Check to see if there are any other codes along with P0057 and clear your Check Engine Light with FIXD.
- Check the freeze frame data in an attempt to pinpoint the issue.
- Visually inspect the wiring around the control circuit sensor for disconnection.
- If the wiring directly attached to the HO2S sensor is damaged, replace the HO2S sensor.
- Check resistance of heater element to ensure it is within specified range.
- If no voltage is detected (open circuit), replace any blown fuse from the short.
- If the problem persists, consider replacing the HO2S sensor.